North America
TAKEX America Inc.

151 San Zeno Way, Sunnyvale
CA 94086, USA

(877) 371-2727
Latest news
ISC West 2018
TAKEX America, Inc. will be exhibiting at ISC-West 2018, April 11-13 2018 at the Sands Expo & Convention Center, Las Vegas NV - booth #4124. ISC ...more
ATX West 2018
We will be exhibiting at ATX West, Booth 4077 February 6-8, 2018 - Anaheim Convention Center, CA. ATX West connects you with serious automation and r ...more
(877) 371-2727
TAKEX America Inc.
151 San Zeno Way, Sunnyvale CA 94086, USA
Photoelectric Beams / PB-50FA / 100FA / 200FA SERIES

PB-50FA / 100FA / 200FA SERIES

Description

PB-50FA PB-100FA PB-200FA
up to 165ft outdoor up to 330ft outdoor up to 660ft outdoor

The professional choice in outdoor protection, our Quad beam detectors synchronise 16 beam paths for maximum stability in severe weather conditions, perfect for long range perimeter protection.

Features


  • 4 x synchronised high power beams
  • double modulation for unsurpassed light immunity
  • dynamic auto-gain lock (AGL)
  • ±90° horizontal ± 10° vertical adjustable sensor heads
  • 50,000 lux sunlight immunity
  • IP55 housing

  
  
  

Details

  • Specifications
  • Downloads

note: PB-F series Quad Beams are 'Single Channel' units for simple beam systems. For more complex systems eg. multiple stacked beams or in-line systems use PB-IN-HF series 4-Channel units to avoid 'Crosstalk'.

Model PB-50FA PB-100FA PB-200FA
Detection system
Near infrared beam interruption system
4 beam simultaneous interruption
Infrared beam
Double modulation pulsed beams by LED
Protection distance
Outdoor 50m (165ft)
Indoor 100m (330ft)
Outdoor 100m (330ft)
Indoor 200m (660ft)
Outdoor 200m (660ft)
Indoor 400m (1,320ft)
Max. beam range (approx.)
500m (1,650ft) 1000m (3,300ft) 2000m (6,600ft)
Response time
50msec. to 700msec. (Standard: 50msec.)
Supply voltage 12V to 30VDC (Non-polarity)
Current consumption
max. 95mA or less max. 105mA or less max. 120mA or less
Alarm output
Dry contact relay: NO or NC (selectable)
Reset : Interruption time + off-delay (approx. 1.5 sec.)
Contact capacity : 30V (AC/DC) 1A or less
Tamper output
Dry contact : NC
Contact operation : Output when cover is detached
Contact capacity : 30V (AC/DC) 0.1A or less
Alarm LED
Red LED (Receiver) lights when alarm is initiated
Attenuation LED
Red LED (Receiver) lights when beam reception attenuated
Functions Tone indicator, Alarm memory indication, Programmed AGC, Auto-gain lock, Monitor jack, Target color
Beam adjustment
Horizontal : ±90°, Vertical : ±10°
Ambient temperature range
- 35°C to +66°C (-31°F to +151°F)
Mounting position Outdoor (IP55)
Wiring
Terminals
Weight Transmitter : 1200g (42oz)
Receiver : 1300g (45.5oz)
Appearance Resin (wine red)

The specifications are subject to change without notice.

Datasheet
Instruction Manual