Please select your region from the drop-down menu above to find your nearest TAKEX office
The TAKEX indoor Reflector Beam series is designed for applications where a 'beam-break' is desirable, but running wire to both ends in impractical.
The PR-1B is a non-reflector type presence sensor which emits an infra-red beam to a distance of 1m. When the Infra-red beam signal is reflected back to the transceiver (by a passing human or object) a contact output is triggered. The PR-1B is a pocket calculator sized beam designed for unobtrusive protection.
For distances up to 1m (3.3ft) indoor.
note: For correct operation, the sensor should be installed in a position where there is no obstacle within 2m (6.6ft).
- Non-reflector type Presence Sensor
- Cable only to one end: for applications where a beam break is desirable but wiring to both ends is impractical
- Small "pocket-calculator" sized housing for unobtrusive protection
|Product type||Photoelectric Beam Sensor|
|Detection system||Near Infrared
(Direct reflective detection of motionless objects)
|Protection distance||1m (3.3ft) or less|
||100msec. or more|
|Alarm Output||Dry contact relay output: 1c
Contact activation: detection time + off delay (approx. 0.5sec.)
Contact capacity: 30V AC/DC, 0.5A or less
|Supply voltage||10.5V to 22VDC (non-polarity)|
|Current consumption||60mA or less (at 12VDC)|
|Ambient Temperature range||-20°C to +50°C (-4°F to +122°F)|
|Weight||Approx. 75g (2.6oz)|
|Appearance||ABS Resin (off-white)|