North America
TAKEX America Inc.

151 San Zeno Way, Sunnyvale
CA 94086, USA

(877) 371-2727
Latest news
ASIS 2017
TAKEX America, Inc. is pleased to announce that we will be hosting a booth at the ASIS International 63rd Annual Seminar & Exhibits (ASIS 2017) i ...more
ESX 2017
TAKEX will be exhibiting at ESX 2017, June 14 & 15, 2017 at the Music City Center in Nashville, TN booth #807. ESX is where cutting edge business ...more
(877) 371-2727
TAKEX America Inc.
151 San Zeno Way, Sunnyvale CA 94086, USA
SSP Pick Bin / SSP-S200 Series Light curtain sensors

SSP-S200 Series Light curtain sensors

Description

Picking Sensor to verify and instruct the removal of a part.

  • Retroreflective and Diffuse reflective mode switching
    It is possible to switch between Retroreflective and Diffuse reflective modes by flipping an inner switch. You can select either Retroreflective or Diffuse reflective mode depending on the detecting distance for use.
  • Super thin body at only 13mm thick with sturdy metal case
    The metal case protects against impacts that may occur when an item removed from a shelf hits the case. Also, its space-saving thinness means the sensor does not become an obstacle during work
  • Easy-to-see large Job indicator
    On the side of the body there are two large sized, high intensity green LED job indicators which are easy to see
  • NPN/PNP dual output
    You can select either NPN or PNP output with an inner switch of the sensor, which will contribute to reducing your stock of sensors.
  • Fault indicator
    If you remove the wrong item from a shelf, red Fault indicator lights will flash on and off, alerting you to the error
  • Initial sensitivity setting function
    When you turn on the power after selecting either Retroreflective or Diffuse reflective mode, the optimal sensitivity is automatically set by the initial sensitivity setting function.

 

Type

Detection method Detecting distance Detecting width Model No. of beams Operation mode Output mode Connection
Diffuse reflective 700mm 100mm SSP-S204R 4 Normal Open or
Normal Close
switching
Open
collector output
NPN/PNP switching
Cable
225mm SSP-S208R 8
Retroreflective 2m 100mm SSP-S204R-PJ 4 Cable with
connector
225mm SSP-S208R-PJ 8

Reflectors and mounting brackets are optional accessories.

 

Optional Accessories

Type Model Shape Description
Dedicated
mounting Bracket
SSP-B1 flat Mounting brackets: a set of two brackets
(M4x12 SEMS screws with washers and nuts)
SSP-B2 L-shape
Cable with
connector
FAC-D4R2S straight M12 oter dia.: 6mm
Cable 0.2mm² x 4 cores 2m (sheath black)
FAC-D4R2L Angle
FAC-D4R5S straight M12 oter dia.: 6mm
Cable 0.2mm x 4 cores 5m (sheath black)
FAC-D4R5L Angle
Protective cover SSP-BF205 Protective cover: 1
SSP-BF210
Reflector S-SSP120 Adhesive tape on the back side cuttable
S-SSP245
Mounting Bracket SSP-BR1 Mounting brackets: a set of two brackets
SSP-BR2

 

Features


  • Picking sensor for checking and instruction of removing parts from bin
  • Thinness of 13mm achieved with rigid metal case
  • Large work operation indicator is provided (Job light)
  • Faulty work operation indicator is provided (Fault light)
  • Retro/Diffuse mode in one sensor

  
  
  

Details