Please select your region from the dropdown, on the left hand side of the page.
Please select your region from the drop-down menu above to find your nearest TAKEX office



With ultra-low current consumption for long battery life, and solid state (NO/NC) outputs for both alarm and 3-stage tamper, the new TX-114FR detector is compatible with leading wireless transmitters for rapid deployment in remote or difficult-to-cable-to areas.

Selectable AND/OR gating ensures maximum stability in even the most challenging environments. The TX-114FR is ideal for triggering CCTV, lighting or warning systems in commercial, domestic and industrial applications.

Dual-Zone: Up to 12m (40ft) x 180 degrees


  • Dual-Zone sensor head can resist detection of small animals
  • Ultra-Low Current Consumption
  • Powered by 3V to 9V Alkaline or Lithium Battery
  • Can be used with numerous Wireless Transmitter Models (Not Supplied)
  • Adjustable Pulse Count & Sensitivity
  • Front, Mid and Back Tampers
  • 0.8-1.2m Mounting Height



  • Specifications
  • Downloads

Model TX-114FR
Detection system Passive infrared
Coverage When horizontal detection Angle: 90°
Detection distance: 40ft (12m)
Horizontal zone: 7 zones
Downward zone: 7 zones
Coverage adjustment
Horizontal: 90 degrees Detection distance:10ft to 40ft (3m to 12m)
(Adjustable by changing the vertical angle of downward curtain)
Supply voltage 3V to 9VDC Alkaline or Lithium Battery
Operation voltage 2.3V to 10VDC
Current consumption 35μA
5mA/3V (Test mode)
Operation Solid State Switch N.C./N.O. selectable
10VDC · 0.01A Max
•Alarm output
One shot output when detecting human beings (approx. 2sec)
•Tamper output
Real time output
· when the cover is detatched from the unit
· when the unit is detatched from the installed wall or pole.
•Trouble output
Real time output when the unit suffers
functional trouble. (from terminal of Alarm)
Operation LED Red LED
•Blinking for approx.1min at warming-up
•Lighting for 1sec at detection during walk-test (LED lights only in a test-mode)
•Blinking when trouble alarm is issued (Lights once every 5 sec)
Sensitivity adjustment Approx. 30% to 170% (by rotary switch)
Pulse count Once/Three times selectable (by dip switch)
Alarm prohibition time 10sec/120sec/300sec/900sec selectable (by dip switches)
Detection mode AND/OR selectable
Ambient temperature -4°F to +122°F (-20°C to +50°C)
Mounting position Indoor/Outdoor (Wall or Pole)
Weight 20oz (620g)
Appearance Body: AES resin   
Lens: PE resin
Accessories Pole attachment:2sets
Mounting screw: 2pcs
Adhesive sheet: 1pc
Area masking sheet
Battery holder:1pc

Instruction Manual