North America
TAKEX America Inc.

151 San Zeno Way, Sunnyvale
CA 94086, USA

(877) 371-2727
Latest news
ISC West 2018
TAKEX America, Inc. will be exhibiting at ISC-West 2018, April 11-13 2018 at the Sands Expo & Convention Center, Las Vegas NV - booth #4124. ISC ...more
ATX West 2018
We will be exhibiting at ATX West, Booth 4077 February 6-8, 2018 - Anaheim Convention Center, CA. ATX West connects you with serious automation and r ...more
(877) 371-2727
TAKEX America Inc.
151 San Zeno Way, Sunnyvale CA 94086, USA
Battery Operated / TXF-125E-KH

TXF-125E-KH

Description

TXF-125E-KH
up to 82ft
up to 165ft
up to 245ft up to 330ft

The TXF-125E-KH is a battery operated quad photoelectric beam sensor for use in TA series Beam Towers, designed for compatibility with leading wireless systems; reducing the time and cost of permanent installations and allowing the use of Active Infrared Beams on rapid deployment or temporary installations.

With 4 selectable frequencies, multiple beam sets can be used in both linear and stacked configurations without risk of crosstalk, further assisted by a transmitter power function that allows the user to set 82/165/245/330ft zones.

Two 3.6V (17Ah) batteries can power each unit for approximately 5 years of service, and ±90° horizontal/±20° vertical adjustable optics cater for the most dynamic of terrains.

Features


  • specifically designed for use in TA series Tower Enclosures
  • 4 x synchronised high power beams
  • 4 selectable operation ranges 82/165/245/330ft
  • 4 selectable beam channels to prevent crosstalk
  • up to 5 year battery life using 2 x LS 33600 (3.6V 17Ah) batteries per unit
  • increased beam separation minimises nuisance alarms
  • vivid internal colour aids beam alignment procedure
  • ±90° horizontal ±20° vertical adjustable sensor heads
  • environmental monitoring circuit

  
  

Details

  • Specifications
  • Downloads

Model TXF-125E-KH
Detection system Near infrared pulsed beam interruption system
(TR-RE 4 beam simultaneous interruption)
Infrared beam Single modulation pulsed beam by LED (near infrared beam light-emitting diode)
Protection distance Outdoor 330ft (100m) or less
Beam power setting 330ft (100m) / 245ft (75m) / 165ft (50m) / 82ft (25m)
Max. arrival distance 10 times
3,300ft (1000m)
Response time 0.05 sec, 0.10 sec, 0.25 sec, 0.5 sec
Modulated beam frequency selection 4-channels
Power supply voltage 3.6VDC (recommended battery: SAFT lithium thionyl chloride battery LS33600)
Current consumption 750μA
Transmitter: Approx. 430μA (during protection)
Receiver: Approx. 320μA (during protection)
(normal temperature, 3.6V DC)
Battery life Transmitter: Up to 5 years* (2 batteries)
Receiver: Up to 5 years* (2 batteries)
*Approximate, not guaranteed
ALARM OUTPUT
(Receiver only)
Dry contact relay output form C
30V DC 0.1A (resistive load)
ENVIRONMENT OUTPUT
(Receiver only)
Dry contact relay output form C
30V DC 0.1A (resistive load)
LOW BATTERY OUTPUT
(Transmitter and Receiver)
Dry contact relay (N.C.)
30V DC 0.1A (resistive load)
POWER OUTPUT
(Transmitter and Receiver)
3.0V DC 50mA MAX
Beam adjustment Horizontal: ±90°, Vertical: ±20°
Alarm LED Red LED (Receiver) ON: when an alarm is initiated
Attenuation LED Red LED (Receiver) ON: when an alarm is initiated
Ambient temperature range -10°C to +50°C (14°F to 122°F)
Functions Sound check
Monitor jack
Upper/lower beam switch
Low battery indication
Wireless alignment checker connection
Battery saving
Repeat output
Battery sharing
Mounting position Outdoor, Indoor
Weight Transmitter: Sensor Unit 17.5oz (500g) ,Base 21.7oz (620g) excluding batteries
Receiver: Sensor Unit 17.5oz (550g) ,Base 21.7oz (620g) excluding batteries
Appearance Sensor unit: PC/ABS resin, Base: ASA resin Black

The specifications are subject to change without notice.

Instruction Manual