North America
TAKEX America Inc.

151 San Zeno Way, Sunnyvale
CA 94086, USA

(877) 371-2727
Latest news
ATX West 2019
We will be exhibiting at ATX West, Booth 4389 February 5-7, 2019 - Anaheim Convention Center, CA. ATX West is North America's biggest annual automati ...more
Automate 2019
TAKEX America, Inc. will be exhibiting at Automate, April 8-11 2019 at McCormick Place, Chicago IL - booth #8649. Automation is helping companies in ...more
(877) 371-2727
TAKEX America Inc.
151 San Zeno Way, Sunnyvale CA 94086, USA
Industrial Sensors / CS-R80 Passive type color sensors

CS-R80 Passive type color sensors


Quick and economical method to sort and batch your LEDs and tinted Lamps. Works on RGB sampling principal, and can be taught automatically or manually.


  • The CS-R80 Series sensor distinguishes the light sources of LEDs and color lamps by color.
  • To register the basic colors, a teaching system is provided with the push buttons or external inputs.
  • Switching system between 1 output point (with external teaching) and 3 output points (without external teaching) is provided.
  • Set the basic colors and tolerances separately by channel.


  • Specifications

Models CS-R80 CS-R80PN
Detection method Detection by R.G.B color ratio
Power supply 12-24VDC±10%, Ripple 10% Max.
Current consumption 50mA(Max.)
Standard color registered teaching 1 color (Mode 1)
teaching 3 colors (Mode 3) *1
Input/Output Teaching by set button or external input : 1 output (Mode 1)
Teaching by set button : 3 output (Mode 3)
External teaching Non voltage input (contact, non contact)(valid for Mode 1)
Output mode NPN open collector output
Sink current 50mA(DC30V)Max. residual voltage : 2V
PNP open collector output
Source current 50mA(DC30V)Max. residual voltage : 2V
Operating mode Conformity On or Off selectable
Time delay Selectable between On delay, Off delay and timer disabled
Delay time : 250ms fixed
Response time 50ms or less *2
Indicators Operation indicator : "OP" LED lights
Level indicator : Level Max. "H" LED lights
Level indicator : Level Min. "L" LED lights
Display 4 digit indicator
Switches (+),(-) Push button switch:
select Mode/resister standard color/change setting value/select channel
Selectable switch: select RUN/SELECT/SET
Circuit protection Short circuit protection
Materials Polycarbonate
Cable Flying lead 2m( outer dia φ3.7)
Weight (Max.) 60g

*1. The factory setting is Mode 1.
*2. The detection is activated after 1 second of power ON. Response time is fluctuated by ambient light.
*3. Recommended fiber : FT105BC-CS, Detecting distance : 5mm or less


Environmental Characteristics

Ambient light 1000lx or less
Temperature range Operating : -25 to +55℃, Storage : -40 to +70℃
Humidity 35~85%RH
Enclosure rating IP40
Vibration resistance 10 to 55Hz, 1.5mm double amplitude, 2 hr. in X, Y and Z
Shock 500m/s² 3 times in X,Y and Z directions