TAKEX America Inc.

4/15 Howleys Road, Notting Hill,
VIC 3168

+61 3 9544 2477
Latest news
2016 Product Catalogue
Our latest product catalogue is now available to view online! ...more
Product Launch: TXF-125E
Our first battery operated Quad Beam designed to be compatible with all leading wireless systems, reducing the time and cost of permanent ...more
+61 3 9544 2477
TAKEX America Inc.
4/15 Howleys Road, Notting Hill, VIC 3168



Quick and economical method to sort and batch your LEDs and tinted Lamps. Works on RGB sampling principal, and can be taught automatically or manually.


  • The CS-R80 Series sensor distinguishes the light sources of LEDs and color lamps by color.
  • To register the basic colors, a teaching system is provided with the push buttons or external inputs.
  • Switching system between 1 output point (with external teaching) and 3 output points (without external teaching) is provided.
  • Set the basic colors and tolerances separately by channel.


  • Specifications

Models CS-R80 CS-R80PN
Detection method Detection by R.G.B color ratio
Power supply 12-24VDC±10%, Ripple 10% Max.
Current consumption 50mA(Max.)
Standard color registered teaching 1 color (Mode 1)
teaching 3 colors (Mode 3) *1
Input/Output Teaching by set button or external input : 1 output (Mode 1)
Teaching by set button : 3 output (Mode 3)
External teaching Non voltage input (contact, non contact)(valid for Mode 1)
Output mode NPN open collector output
Sink current 50mA(DC30V)Max. residual voltage : 2V
PNP open collector output
Source current 50mA(DC30V)Max. residual voltage : 2V
Operating mode Conformity On or Off selectable
Time delay Selectable between On delay, Off delay and timer disabled
Delay time : 250ms fixed
Response time 50ms or less *2
Indicators Operation indicator : "OP" LED lights
Level indicator : Level Max. "H" LED lights
Level indicator : Level Min. "L" LED lights
Display 4 digit indicator
Switches (+),(-) Push button switch:
select Mode/resister standard color/change setting value/select channel
Selectable switch: select RUN/SELECT/SET
Circuit protection Short circuit protection
Materials Polycarbonate
Cable Flying lead 2m( outer dia φ3.7)
Weight (Max.) 60g

*1 The factory setting is Mode 1.
*2 The detection is activated after 1 second of power ON. Response time is fluctuated by ambient light.
*3 Recommended fiber : FT105BC-CS, Detecting distance : 5mm or less


Environmental Characteristics

Ambient light 1000lx or less
Temperature range Operating : -25 to +55℃, Storage : -40 to +70℃
Humidity 35~85%RH
Enclosure rating IP40
Vibration resistance 10 to 55Hz, 1.5mm double amplitude, 2 hr. in X, Y and Z
Shock 500m/s² 3 times in X,Y and Z directions