Please select your region from the dropdown, on the left hand side of the page.
Please select your region from the drop-down menu above to find your nearest TAKEX office





    • Specifications
    • Downloads

    Model FS-6000E
    Detection system Ultraviolet rays detection
    (detected wave length 185~260nm)
    Detection area Distance: 10m (33ft) max. (7cm flame)
    · Horizontal: approx. 100°
    · Vertical: approx. 75° (15° upward/60° downward)
    Adjustment range 
    · Horizontal: 180°
    · Vertical: downward 90°
    Sensitivity adjustment Sensitivity: L (50%) to H (100%) (selectable)
    Detection timer: 1sec, 6sec, 15sec, 30sec (selectable)
    Power supply 12VDC
    Power consumption Standby: 35mA or less
    Activation: 500mA or less
    Warning message output Operation: output warning message when detecting flames (one-shot)
    Message selection: 4 options available (selectable)
    · English: Inflammable materials in this area. No naked flames.
    · Spanish: Materiales inflamables en este area. Sin llamas.
    · French: Produits inflammables pas de flammes nues.
    · Italian: Attenzione zona a rischio incendi, non fumare e non usare flamme liebre.
    Volume: mute - 100dB approx. (1m ahead)
    External output Dry contact relay Form C (NO/NC)
    Contact capacity: 30V (AC/DC) 0.5A or less, (resistance load)
    Output operation: off delay approx. 2 secs.
    LED Red LED: blinks during warning message output
    Wiring Reed wiring
    Power supply: 2 / dry contact: 3
    Installation method Screw on flange
    Ambient temperature -20°C to +50°C (-4°F to +122°F)
    Installation Indoor/outdoor
    Weight Approx. 1kg (35oz)
    Appearance Sensor part: PC resin (black)
    Bracket: PPO resin (black)
    Supplied accessories · Installation flange: 1pc
    · Tapping screw 1 type ∅4x30(SUS): 4pcs 
    · Area mask seal: 1pc

    Instruction Manual