Through beam for Bin-Picking System Light curtain sensors

SSP-T200 Series

Suitable to use as part of a binpicking system to avoid mispicks.
Thinness of 13 mm achieved with rigid metal case
Large job indicator (job light)
Faulty job indicator (fault light) is provided
4 types are available for different sizes of parts bins
Requiring no synchronization line
Asynchronous method employed, eliminating need for synchronization line

Contact us about this series

Downloads

SSP-T200 Series

Model	Connection	Detection method	Light source	Operation mode	Output mode	Power supply	Response time
SSP-T205	outer diameter: dia. 4.1 mm, Transmitter: 0.2mm^2 x 3 cores, 2m, (gray) Receiver: 0.2mm^2 x 4 cores, 2m, (black)	Through beam	Infrared LED (wavelength : 880nm)	Light ON/Dark ON selectable (with switch)	Control output : Selectable between NPN output and PNP output with switch Rating : Sink current 50mA (30VDC) or less / Residual voltage: 2V or less	12-24VDC ±10% / Ripple 10% or less	Normal: Light reception: 35 ms or less Light blocking: 25 ms or less With frequency switching feature enabled: Light reception: 45 ms or less Light blocking: 28 ms or less	Contact
SSP-T205-PJ	Cable with M12 4 pin connector pigtail, 0.3m transmitter: gray / receiver: black	Through beam	Infrared LED (wavelength : 880nm)	Light ON/Dark ON selectable (with switch)	Control output : Selectable between NPN output and PNP output with switch Rating : Sink current 50mA (30VDC) or less / Residual voltage: 2V or less	12-24VDC ±10% / Ripple 10% or less	Normal: Light reception: 35 ms or less Light blocking: 25 ms or less With frequency switching feature enabled: Light reception: 45 ms or less Light blocking: 28 ms or less	Contact
SSP-T210	outer diameter: dia. 4.1 mm, Transmitter: 0.2mm^2 x 3 cores, 2m, (gray) Receiver: 0.2mm^2 x 4 cores, 2m, (black)	Through beam	Infrared LED (wavelength : 880nm)	Light ON/Dark ON selectable (with switch)	Control output : Selectable between NPN output and PNP output with switch Rating : Sink current 50mA (30VDC) or less / Residual voltage: 2V or less	12-24VDC ±10% / Ripple 10% or less	Normal: Light reception: 68 ms or less Light blocking: 42 ms or less With frequency switching feature enabled: Light reception: 74 ms or less Light blocking: 52 ms or less	Contact
SSP-T210-PJ	Cable with M12 4 pin connector pigtail, 0.3m transmitter: gray / receiver: black	Through beam	Infrared LED (wavelength : 880nm)	Light ON/Dark ON selectable (with switch)	Control output : Selectable between NPN output and PNP output with switch Rating : Sink current 50mA (30VDC) or less / Residual voltage: 2V or less	12-24VDC ±10% / Ripple 10% or less	Normal: Light reception: 68 ms or less Light blocking: 42 ms or less With frequency switching feature enabled: Light reception: 74 ms or less Light blocking: 52 ms or less	Contact
SSP-T213	outer diameter: dia. 4.1 mm, Transmitter: 0.2mm^2 x 3 cores, 2m, (gray) Receiver: 0.2mm^2 x 4 cores, 2m, (black)	Through beam	Infrared LED (wavelength : 880nm)	Light ON/Dark ON selectable (with switch)	Control output : Selectable between NPN output and PNP output with switch Rating : Sink current 50mA (30VDC) or less / Residual voltage: 2V or less	12-24VDC ±10% / Ripple 10% or less	Normal: Light reception: 70 ms or less Light blocking: 42 ms or less With frequency switching feature enabled: Light reception: 88 ms or less Light blocking: 54 ms or less	Contact
SSP-T213-PJ	Cable with M12 4 pin connector pigtail, 0.3m transmitter: gray / receiver: black	Through beam	Infrared LED (wavelength : 880nm)	Light ON/Dark ON selectable (with switch)	Control output : Selectable between NPN output and PNP output with switch Rating : Sink current 50mA (30VDC) or less / Residual voltage: 2V or less	12-24VDC ±10% / Ripple 10% or less	Normal: Light reception: 70 ms or less Light blocking: 42 ms or less With frequency switching feature enabled: Light reception: 88 ms or less Light blocking: 54 ms or less	Contact
SSP-T216	outer diameter: dia. 4.1 mm, Transmitter: 0.2mm^2 x 3 cores, 2m, (gray) Receiver: 0.2mm^2 x 4 cores, 2m, (black)	Through beam	Infrared LED (wavelength : 880nm)	Light ON/Dark ON selectable (with switch)	Control output : Selectable between NPN output and PNP output with switch Rating : Sink current 50mA (30VDC) or less / Residual voltage: 2V or less	12-24VDC ±10% / Ripple 10% or less	Normal: Light reception: 94 ms or less Light blocking: 58 ms or less With frequency switching feature enabled: Light reception: 116 ms or less Light blocking: 72 ms or less	Contact
SSP-T216-PJ	Cable with M12 4 pin connector pigtail, 0.3m transmitter: gray / receiver: black	Through beam	Infrared LED (wavelength : 880nm)	Light ON/Dark ON selectable (with switch)	Control output : Selectable between NPN output and PNP output with switch Rating : Sink current 50mA (30VDC) or less / Residual voltage: 2V or less	12-24VDC ±10% / Ripple 10% or less	Normal: Light reception: 94 ms or less Light blocking: 58 ms or less With frequency switching feature enabled: Light reception: 116 ms or less Light blocking: 72 ms or less	Contact

More Info

Dimension
Circuit

SSP-T200 series

SSP-T200-PJ series

Protective cover

Use the mode switch to select NPN/PNP for output and job indicator input.

Connection

Cable extension
To extend the cable, use wires of at least 0.5mm^2 and limit the length to within 100m for transmitter and receiver.