Contact
UK & EMEA North America Australia Japan & Asia France
Detecting Steel rods Light Curtain Sensor

SST300N Series

  • Best for detecting steel rods (φ15 mm)
  • Detecting width can be changed
    • You can change the width from 1 to 6 blocks.
  • Mutual interference prevention function
    • Two sensors can be connected to each other.
  • Numerous optional parts are available
    • You can use the sensor in a hot or dusty environment.
  • Mounting brackets for vibration and shock resistance included
Contact us about this series

SST300N Series

Model Detection method Detecting distance Detecting width Number of beams Protective structure  
SST316N Through beam 2m 150mm 16 IP54
Contact
SST332N Through beam 2m 310mm 32 IP54
Contact
SST348N Through beam 2m 470mm 48 IP54
Contact
SST364N Through beam 2m 630mm 64 IP54
Contact
SST380N Through beam 2m 790mm 80 IP54
Contact
SST396N Through beam 2m 950mm 96 IP54
Contact

More Info

Transmitter

Receiver

Air purge unit (F300N) and water cooling jacket (WJ300N) attached (Receiver)

Air purge unit (F300N) attached (Receiver)

Water cooling jacket (WJ300N) attached (Receiver)

The output transistor turns off when a load short-circuit or overload occurs. Check the load state before restarting.

Connection for single set use

  • Use a relay suitable for the power supply and the output rating.
    Also, use a surge suppressor diode.
  • The output transistor turns off when a load short-circuit or overload occurs. Check the load state before restarting.
  • The black and purple lines of the transmitter are not connected.
    The lines need insulating so that they will not touch other lines.

Connection for mutual interference prevention

  • Use a relay suitable for the power supply and the output rating.
    Also, use a surge suppressor diode.
  • The output transistor turns off when a load short-circuit or overload occurs. Check the load state before restarting.
  • When using two power supplies, share a common OV.