North America
TAKEX America Inc.

151 San Zeno Way, Sunnyvale
CA 94086, USA

(877) 371-2727
Latest news
ATX West 2019
We will be exhibiting at ATX West, Booth 4389 February 5-7, 2019 - Anaheim Convention Center, CA. ATX West is North America's biggest annual automati ...more
Automate 2019
TAKEX America, Inc. will be exhibiting at Automate, April 8-11 2019 at McCormick Place, Chicago IL - booth #8649. Automation is helping companies in ...more
(877) 371-2727
TAKEX America Inc.
151 San Zeno Way, Sunnyvale CA 94086, USA
Security Sensors / PIR-T15WE / T15AM



...the detector is impressive. Not only did it cope very well with the standard tests, but when we pushed it a bit to see how other modes worked, it took pretty much everything in its stride.
Benchmark Magazine, Group test: External Space Detection
October 2015

  PIR-T15AM (with Anti-Masking)
  Low Position High Position Pet Mode High Density
Mount Height 6.6ft - 9ft
9ft - 11.5ft
8ft - 9.9ft
6.6ft - 20ft
Coverage 49ft x 80~81° 49ft x 80~83° 49ft x 80° 49ft x 80~85°
  Standard Operation Specialised Operation

The PIR-T15 is a high performance triple mirror passive infrared detector designed for both indoor and outdoor intruder applications.

The unique combination of triple mirrors and three twin pyros enable 4 selectable operation modes including Low Position, High Position, Pet Mode, and High Density; for distances up to 49ft from a mounting height of 6.6 to 20ft, throughout a full 80 degrees.

Available with (PIR-T15AM) and without (PIR-T15WE) active Anti-Masking technology.


  • 4 Operation modes; Low Position, High Position, Pet Mode, and High Density
  • Up to 49ft x 80 degree coverage
  • 6.6 to 20ft Installation height (depending on operation mode)
  • High performance triple mirror optical system
  • Precise detection area adjustment function
  • Anti-masking function (PIR-T15AM)
  • Lightning surge protection
  • Suitable for indoor and outdoor use (IP55)



  • Specifications
  • Downloads

Detection system Passive Infrared
Detection area Wide angle (80°) detection
Detection distance: 49' (15m), 108 rays (54 pairs)
Power supply 9 to 28VDC (non polarity)
Current consumption Max. 40mA
Alarm output Contact method: Dry semi-conductor contact, N.C./N.O. selectable
Contact operation: One-shot operation when detecting intrusion
Contact rating: 24V (AC/DC) 0.25A (resistive load)
External output Contact method: Dry semi-conductor contact, N.O.
Contact operation: One-shot operation/Off delay operation selectable when detecting intrusion
Contact rating: 24V (AC/DC) 0.25A (resistive load)
Tamper output Contact method: Dry mechanical contact, N.C.
Contact operation: Continuous output
Contact rating: 24V (AC/DC) 0.1A (resistive load)
Anti-masking output N/A Contact method: Dry semi-conductor contact, N.C.
Contact operation: continuously output when an object is placed in front of the lens (until normal recovery)
Contact rating: 24V (AC/DC) 0.1A (resistive load)
Alarm LED Red LED: Blinks during warm up
Lights at alarm
Memory LED Red LED: Blinks for 3 minutes during memory display
Functions Sensitivity selection, Operation mode selection, Alarm memory LED, Self diagnosis, Low voltage monitoring, Temperature compensation, Tamper, LED area checker, Environmental adjustment ,Creep zone detection, Walk test mode, Near area cancellation, Long-term diagnosis
Mounting positions • Low position mode: 6.6’ to 9’(2.0 to 2.7m)
• High position mode : 9’ to 11.5’(2.7 to 3.5m)
• Pet mode : 8.3’ to 10’(2.5 to 3.0m)
• High density mode : 6.6’ to 20’(2.0 to 6.0m)
Angle adjustment Horizontal direction: 90° (by 5°pitch)
Ambient temperature -25°C to +55°C (no condensation and freezing)
Installation place Indoor/outdoor wall surface
IP rating
Terminals (M2.6 self up terminal)
Weight Approx. 600g
Appearance Body: AES resin, Window: PE resin

The specifications are subject to change without notice.

Instruction Manual (PIR-T15WE)
Instruction Manual (PIR-T15AM)