North America
TAKEX America Inc.

151 San Zeno Way, Sunnyvale
CA 94086, USA

(877) 371-2727
Latest news
ATX West 2019
We will be exhibiting at ATX West, Booth 4389 February 5-7, 2019 - Anaheim Convention Center, CA. ATX West is North America's biggest annual automati ...more
Automate 2019
TAKEX America, Inc. will be exhibiting at Automate, April 8-11 2019 at McCormick Place, Chicago IL - booth #8649. Automation is helping companies in ...more
(877) 371-2727
TAKEX America Inc.
151 San Zeno Way, Sunnyvale CA 94086, USA
Anti-Crawl / PXB-100ATC



up to 330ft outdoor

Our PXB-100ATC photoelectric beam sensors were developed for high-risk applications where detection of all intrusion attempts is critical. Sophisticated dual response output systems have been designed to distinguish and allocate specific alarm responses based on the size and speed of target objects moving through the detection area, and a unique synchronized timing system ensures unrivalled detection performance and versatility.


  • independent control of upper and lower beams
  • choose between synchro-quad and anti-crawl operation
  • dual outputs for crawl attempt and full beam break
  • sync wire allows unlimited stacking without crosstalk
  • 4 selectable beam channels
  • increased beam separation minimises nuisance alarms
  • vivid internal colour aids beam alignment procedure
  • lightning and surge protection up to 15kV
  • IP65 housing



  • Specifications
  • Downloads

Model PXB-100ATC
Product type Photoelectric Beam Sensor
Detection system Near infrared beam interruption system
(4 beams simultaneous interruption or upper/lower 2 beams interruption)
Infrared beam Double modulation pulsed beam by infrared LED
Protection distance Outdoor 100m (330ft) or less
Indoor 200m (660ft) or less
Max. beam range Outdoor 1000m (3300ft) or less
Indoor 1000m (3300ft) or less
Response time OR gated : upper and lower 2 beams simultaneous interruption 0.05sec.
upper or lower 2 beams interruption : 0.1/0.2/0.3/0.5 sec. (selectable)
AND gated : upper and lower 2 beams simultaneous interruption 0.05sec.
Supply voltage 12V to 30VDC (Non-polarity)
Current consumption Transmitter : 27mA / Receiver : 48mA
Alarm output Dry contact output : N/C or N/O selectable
Contact action : Interruption time (min. 2 sec)
* During the synchro signal down, alarm signal output continuously
Capacity : AC/DV30V 1A (resistive load) Protective resistor
Environmental output Dry contact output : N/C or N/O selectable
Action : activated when weather condition worsens
Capacity : AC/DC30V 1A (resistive load) Protective resistor
Tamper output Dry contact output : N/C
Action : activated when cover is detached
Capacity : AC/DC30V 0.1A (resistive load) Protective resistor
Alarm LED Red LED (only Receiver) ON : when an alarm is initiated
Attenuation LED Red LED (only Receiver) ON : when beam is attenuated
Functions Modulated beam frequency selection
Tone indicator
Environmental module
Beam power selection
Transmitting power adjustment
Programmed AGC
Synchro timing selection
Auto-gain lock function
Monitor jack
Response time adjustment
Alarm output selection
Environment output selection
Upper / Lower beam switch
Wireless Alignmnet Checker connecting function
Beam Adjustment
Horizontal : ±90° / Vertical : ±20°
Ambient temperature range -35°C to +66°C (-31°F to +151°F)
Mounting positions Outdoor, Indoor
Wiring Terminals
Weight Transmitter : 1400g (49oz)
Receiver : 1470g (51.5oz)
Appearance PC resin (wine red)
Accessory Pole attachment, Anti-bird spike, Screws, Instruction manual

Instruction Manual