North America
TAKEX America Inc.

151 San Zeno Way, Sunnyvale
CA 94086, USA

(877) 371-2727
Latest news
ATX West 2019
We will be exhibiting at ATX West, Booth 4389 February 5-7, 2019 - Anaheim Convention Center, CA. ATX West is North America's biggest annual automati ...more
Automate 2019
TAKEX America, Inc. will be exhibiting at Automate, April 8-11 2019 at McCormick Place, Chicago IL - booth #8649. Automation is helping companies in ...more
(877) 371-2727
TAKEX America Inc.
151 San Zeno Way, Sunnyvale CA 94086, USA
Low Current / PXB-100SW



up to 330ft outdoor

Our ultra low-current PXB-100SW is designed to be powered by BA-6SLA solar panel and power units for wireless or remote applications without cabling infrastructure.


  • 4 x synchronised high power beams
  • low-current consumption for battery or solar operation
  • 4 selectable beam channels to prevent crosstalk
  • double modulation for unsurpassed light immunity
  • increased beam separation minimises nuisance alarms
  • vivid internal colour aids beam alignment procedure
  • lightning and surge protection up to 15kV
  • environmental monitoring circuit
  • dynamic auto-gain lock (AGL)
  • 50,000 lux sunlight immunity
  • IP65 housing
  • optional BA-6SLA solar panel/battery pack available



  • Specifications
  • Downloads

Model PXB-100SW
Product type Photoelectric Beam Sensor
Detection system Near infrared pulsed beam interruption system
(TX-RX 4 beam simultaneous interruption)
Infrared beam Double modulation pulsed beam by LED
Protection distance Outdoor 100m (330ft) or less
Indoor 200m (660ft) or less
Max. beam range Outdoor 1000m (3300ft) or less
Indoor 1000m (3300ft) or less
Response time 0.05 sec. to 0.7 sec. (Variable at pot)
Power supply
5 to 30VDC (polarity)
Current consumption
*1 (armed)
*2 (beam alignment)
5 to 8VDC 10 to 30VDC
Max: 3.7mA *1
Max 8.2mA *2
Max: 5.2mA *1
Max 9.4mA *2
Max: 2.3mA *1
Max 10mA *2
Max: 3.1mA *1
Max 10.7mA *2
Alarm output Dry contact relay output form N.O./N.C switchable
Contact action : Interruption time (min. 2 sec)
Contact capacity : 30V (AC/DC) 1A (resistive load) Protective resistor
Environmental output Dry contact relay output form N.O./N.C. switchable
Action : activated when weather condition worsens
Capacity : 30V (AC/DC) 1A (resistive load) Protective resistor
Tamper output Dry contact relay (N.C.)
Action : activated when cover is detached
Capacity : 30V (AC/DC) 0.1A (resistive load) Protective resistor
Alarm LED Red LED (Receiver) ON : when an alarm is initiated
Attenuation LED Red LED (Receiver) ON : when beam is attenuated
Ambient temperature range -35°C to +66°C (-31°F to +151°F)
Beam Adjustment
Horizontal : ±90° / Vertical : ±20°
Functions Modulated beam frequency selection
Tone indicator
Environmental module
Beam power selection
Transmitting power adjustment
Alarm output selection
Environmental output selection
Monitor jack
Response time adjustment
Upper / Lower beam switch
Wireless Checker
Mounting positions Outdoor, Indoor
IP rating IP65
Wiring Terminals
Weight Transmitter : 1500g (52.5oz)
Receiver : 1550g (54.3oz)
Appearance PC resin (wine red)

Instruction Manual