Australia
TAKEX America Inc.

4/15 Howleys Road, Notting Hill,
VIC 3168

+61 3 9544 2477
Latest news
2016 Product Catalogue
Our latest product catalogue is now available to view online! ...more
Product Launch: TXF-125E
Our first battery operated Quad Beam designed to be compatible with all leading wireless systems, reducing the time and cost of permanent ...more
+61 3 9544 2477
TAKEX America Inc.
4/15 Howleys Road, Notting Hill, VIC 3168
Photoelectric Beams / PXB-50HF-KH / 100HF-KH / 200HF-KH SERIES

PXB-50HF-KH / 100HF-KH / 200HF-KH SERIES

Description

PXB-50HF-KH PXB-100HF-KH PXB-200HF-KH
up to 50m Outdoor up to 100m Outdoor up to 200m Outdoor

PXB-HF-KH Series Beams are designed specifically for use in our TA Series Tower Enclosures.

Features


  • 4 x synchronised high power beams
  • specifically designed for use in TA series Tower Enclosures
  • double coated electronics for demanding environments
  • 4 selectable beam channels to prevent crosstalk
  • double modulation for unsurpassed light immunity
  • increased beam separation minimises nuisance alarms
  • vivid internal colour aids beam alignment procedure
  • lightning and surge protection up to 15kV
  • environmental monitoring circuit
  • dynamic auto-gain lock (AGL)
  • 50,000 lux sunlight immunity

  
  

Details

  • Specifications
  • Downloads

Model PXB-50HF-KH PXB-100HF-KH PXB-200HF-KH
Detection system
Near infrared pulse beam interruption system
(TX/RX 4 beam simultaneous interruption)
Infrared beam
Double modulation pulsed beam by LED
Protection distance
Outdoor 50m or less
Indoor 100m or less
Outdoor 100m or less
Indoor 200m or less
Outdoor 200m or less
Indoor 400m or less
Max. beam range (approx.)
500m
1000m
2000m
Response time
0.05 sec. to 0.7 sec. (Variable at pot)
Supply voltage 12V to 30VDC (Non-polarity)
Current consumption
30mA or less
32mA or less
34mA or less
Alarm output
Dry contact relay output form C
Contact action : Interruption time + delay time (2 sec.)
Contact capacity : 30V (AC/DC) 1A (resistive load)
Protective resistor
Environmental output
Dry contact relay output form C
Contact action : Output when environmental conditions worsen
Contact capacity : 30V (AC/DC) 1A (resistive load)
Protective resistor
Alarm LED
Red LED (Receiver)
ON : when an alarm is initiated
Attenuation LED
Red LED (Receiver)
ON : when beam reception is attenuated
Ambient temperature range
- 35°C to +66°C
Beam adjustment
Horizontal : ±90°, Vertical : ±20°
Functions Modulated beam frequency selection, Tone indicator, Environmental module, Beam power selection, Transmitting power adjustment, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor Jack, Response time adjustment, Upper/Lower beam switch, Wireless checker
Mounting positions
Outdoor / Indoor
Wiring
Terminals

The specifications are subject to change without notice.

Instruction Manual