LED Type Color Sensors
CS Series
- New feature (mix teaching)
- Improved width of color identification through RGB composition
- Easy color setting using the teaching function
Color / Mark Sensors
CS Series
CS Series
| Model | Connection | Detection method | Light source | Output mode | Power supply | Response time | |
|---|---|---|---|---|---|---|---|
| CS-D3 | Attached cable (Outer dimension: dia.4.5 mm) 0.2 mm^2 x 4 cores, 2 m | Fiber | Red, green, blue LEDs (RGB composition) | NPN | 1.6 W or less. | Normal (NML) mode: 1 ms or less. Average value (AVE) mode: 5 ms or less. |
|
| CS-D3PN | Attached cable (Outer dimension: dia.4.5 mm) 0.2 mm^2 x 4 cores, 2 m | Fiber | Red, green, blue LEDs (RGB composition) | PNP | 1.6 W or less. | Normal (NML) mode: 1 ms or less. Average value (AVE) mode: 5 ms or less. |
More Info
Pure RGB composit light for improved color differentiation
Amplifier
CS-D3
CS-D3PN
Optic fiber cable
CS-DF10
Optic fiber cable
CS-DF30
CS-D3
NPN output
CS-D3PN
PNP output
- For an external teaching input, use open collector or relay contact. The function is the same as that of the SET switch on the sensor main unit.
- The output circuit has a built-in short circuit protection circuit. For reset, deactivate the output once by turning the power back on or operating the Bank changeover switch.