Power Supply Units
IP1N
IP1N
| Model | Connection | Operation mode | Output mode | Power supply | Response time | |
|---|---|---|---|---|---|---|
| IP1N | Plug in terminal block (3.5 mm screws) | ON-OFF | Relay output 1c Rating : 5A (250VAC) or less resistive load Voltage output Rating : Output impedance 1 KΩ (12VDC) |
100VAC・110 / 200V・220V ±10% 50 / 60Hz | Sensor input: Relay output 25 ms or less Voltage output 0.5 ms or less External gating input: Voltage output 5 ms or less |
More Info
Input Circuit
- Setting the input operation reverse switch to NORMAL activates the output relay when the input signal is activated (ON).
Setting the switch to INVERTING activates the relay when the input signals is deactivated (OFF).
Output Circuit
External Gating
- Closing (12) and (13) disables the internal circuit.
- When not using external gating, leave them open.
Connection
Terminals (12) and (13) compose an external gating circuit. The internal circuit functions when they are open.