LED Type Color Sensors

CS Series

Model	Connection	Detection method	Light source	Output mode	Power supply	Response time
CS-D3	Attached cable (Outer dimension: dia.4.5 mm) 0.2 mm^2 x 4 cores, 2 m	Fiber	Red, green, blue LEDs (RGB composition)	NPN	1.6 W or less.	Normal (NML) mode: 1 ms or less. Average value (AVE) mode: 5 ms or less.	Contact
CS-D3PN	Attached cable (Outer dimension: dia.4.5 mm) 0.2 mm^2 x 4 cores, 2 m	Fiber	Red, green, blue LEDs (RGB composition)	PNP	1.6 W or less.	Normal (NML) mode: 1 ms or less. Average value (AVE) mode: 5 ms or less.	Contact

New! "Mix teaching" allows accurate differentiation between similar colors

For an external teaching input, use open collector or relay contact. The function is the same as that of the SET switch on the sensor main unit.
The output circuit has a built-in short circuit protection circuit. For reset, deactivate the output once by turning the power back on or operating the Bank changeover switch.