U-shaped Mark Sensor

MC Series

Blue LED type now available (ideal for detecting yellow register marks)
Lens surface is constantly cleaned
No damage to sheets with the large curvature convex lens
- Water resistant IP 67 washable housing

Model	Light source (wavelength)	Detection interval	Output mode	Response time
MC-U2B	Blue LED (450nm)	2 mm fixed	NPN	0.5 ms or less	Contact
MC-U2BTC	Blue LED (450nm)	2 mm fixed	NPN/PNP	0.5 ms or less	Contact
MC-U2G	Green LED (525nm)	2 mm fixed	NPN	0.5 ms or less	Contact
MC-U2GTC	Green LED (525nm)	2 mm fixed	NPN/PNP	0.5 ms or less	Contact
MC-U2R	Red LED (680nm)	2 mm fixed	NPN	0.5 ms or less	Contact
MC-U2RTC	Red LED (680nm)	2 mm fixed	NPN/PNP	0.5 ms or less	Contact

The center of detection is constantly cleaned for stable detection, even with Japanese paper, etc., that generates a large amount of dust.
The top lens is also cleaned by the “spring effect" of work caused by release of tension that occurs when the work runs out.

The output transistor turns off when load short circuit or overload occurs. Check the load and turn the power back on.

The U-shaped sensor can be easily installed. Since the lens surface is always cleaned, this is best for mark detection on traditional Japanese paper.

U-shaped sensor provide easy installation. Register marks on paper are detected by adjusting power of emitted light.