- Retroreflective and Diffuse reflective mode switching
It is possible to switch between Retroreflective and Diffuse reflective modes by flipping an Inner switch.
You can select either Retroreflective or Diffuse reflective mode depending on the detecting distance for use.
- Super thin body at only 13mm thick with sturdy metal case
The metal case protects against impacts that may occur when an item, which you are taking out from a shelve, hits the case. Also, its space-saving thinness means the sensor does not become an obstacle during work.
- Easy-to-see large Job indicator
On the side of the body, there are two large-sized, highintensity green LED Job indicators which are easy to see.
- NPN/PNP dual output
You can select either NPN or PNP output with an inner switch of the sensor, which will contribute to reducing your stock of sensors.
- Fault indicator
If you take out the wrong item from a shelve, red lights of the Fault indicator flash on and off, letting you know the item is wrong.
- Initial sensitivity setting function
When you turn on the power after selecting either Retroreflective or Diffuse reflective mode, the optimal sensitivity is automatically set by the initial sensitivity setting function.