Fiber type / HMD (low temp)

FD300A Series

  • 5-point level indicator facilitating optical axis alignment
  • Cooling unnecessary up to 200 °C
Contact us about this series

FD300A Series

Model Output mode Control output Protective structure  
FD300A Mini power relay output Light ON
Rating: 1c 5A 250VAC
Response time: 15ms
IP66
Contact
FD300AC Solid-state output Light ON
Rating: 0.5A 250VAC/DC
Response time: 3ms
IP66
Contact
FD300AH Signal relay output Light ON
Rating: 1c 0.5A 48VDC
Response time: 5ms
IP66
Contact

More Info

The optical head and amplifier are connected with a fiber optic cable and the infrared ray captured with the optical head is transmitted through highly transmissive glass fiber into an amplifier installed at a distant location. The infrared ray transmitted into the amplifier is optically converted in the light sensitive element and amplified for control signal output (mini power relay, signal relay or solid state output).
Sensors for low temperature (FD300A Series) and medium/high temperature (FD600A Series) are available.

  • No cooling required
    The optical head integrating hood and optical lens and fiber optic cable have no electronic component, which allows use in ambient temperature of up to 200 C without cooling.
  • Excellent durability
    Reliable design with the hood and optical head made of metal, fiber optic cable covered with flexible stainless steel braid and metal cased amplifier provides robustness and resistance to heat and corrosion.
  • 5 point level indicator
    Received light intensity is indicated at 5 levels, offering easy viewing of stability.
  • Self check feature integrated (SAFETY feature)
    Operation can be checked with external signal.
    Stability check feature is provided, which outputs alarm signal (SAFETY ALARM) when there is not much margin in the received light intensity level at detection due to soiling of lens, light axis misalignment, etc. or external disturbing light or residual heat.
  • Two types of detection field of view
    Standard view (dia.50mm/m) and Wide view (200x40mm/m, 400x30mm/m) are available.

Amplifier unit

Fiber optic cable

Control output

SAFETY ALARM output (all models)

When connecting an inductive load such as relay, be sure to use diode, surge absorber, etc. to protect output transistors from counter electromotive force.

Connection

    When connecting an inductive load such as relay as the load, be sure to use diode, surge absorber, etc. for protection of output transistor from back electromotive force.
  • When the leads are extended (100-300 m), stray capacitance between leads may cause rush current. If this poses any problem, provide a resistor (10-50 Ω) in series with the contact.
  • Ground from frame
    Connect to the ground screw (M4) near the connector. You do not have to connect when already connected to the ground Pin.1 with a cable.

Subscribe

Sign up to receive latest news releases and product updates