PB-IN-50HFA / 100HFA / 200HFA SERIES

Description

PB-IN-50HFA	PB-IN-100HFA	PB-IN-200HFA
up to 165ft outdoor	up to 330ft outdoor	up to 660ft outdoor

The PB-IN-HFA series is the flagship of the TAKEX range of infrared photoelectric beams. By synchronizing 16 beam paths between Transmitter and Receiver, the PB-IN-HFA series offer unrivaled stability in perimeter security. Coupled with channel separation and environmental (anti-fog) circuitry, the PB-IN-HFA series has earned worldwide recognition as the standard our rivals aspire to.

Features

4 x synchronised high power beams
4 selectable beam channels to prevent crosstalk
environmental monitoring circuit
dynamic auto-gain lock (AGL)
vivid internal body stickers aid beam alignment procedure
double modulation for unsurpassed light immunity
auto-gain control (AGC)
50,000 lux sunlight immunity
IP55 housing

Add to enquiry

Details

Specifications
Downloads

Model	PB-IN-50HFA	PB-IN-100HFA	PB-IN-200HFA
Detection system	Simultaneous breaking of 4 beams
Infrared beam	LED pulsed beam, Double modulation
Protection distance	Outdoor 165ft or less Indoor 330ft or less	Outdoor 330ft or less Indoor 660ft or less	Outdoor 660ft or less Indoor 1,320ft or less
Max. beam range (approx.)	1,650ft	3,300ft	6,600ft
Response time	50msec. to 700msec. (Variable at pot)
Supply voltage	12V to 30VDC (Non-polarity)
Current consumption	60mA or less	70mA or less	85mA or less
Alarm output	Dry contact relay : NO or NC (selectable) Reset : Interruption time + off delay (approx. 1.5 sec.) Contact capacity : 30V (AC/DC) 1A or less
Environmental output	Dry contact relay : NO or NC (selectable) Contact operation : Output when environmental conditions worsen Contact capacity : 30V (AC/DC) 0.5A or less
Tamper output	Dry contact : NC Contact operation : Output when TX/RX cover is detached Contact capacity : 30V AC/DC, 0.1A or less
Alarm LED	Red LED (Receiver) ON : when an alarm is initiated
Sensitivity attenuation LED	Red LED (Receiver) ON : when beam reception is attenuated
Functions	Modulated beam frequency selection, Tone indicator, Environmental module, Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor Jack
Ambient temperature range	- 35°C to +66°C (-31°F to +151°F)
Beam adjustment	Horizontal : ±90°, Vertical : ±10°
Mounting positions	Indoor / Outdoor
Wiring	Terminals
Weight	Transmitter : 42oz / Receiver : 45.5oz
Appearance	PC resin (wine red)